MAKE SOMETHING OF YOUR OWN

Christmas Perler Bead Patterns You Can Print or Remake

Six original Christmas Perler bead patterns are ready to open below: a wreath, Santa, a reindeer, a decorated tree, a snowman and a gingerbread house. Each one loads into the pattern maker with real Perler colors and a bead count, so you can print it as it is or change the size and colors first. Want something that is not on the list? Describe it and the AI draws a new design for you.

Perler bead chart of a green Christmas wreath with red berries, gold baubles and a red bow
Wreath with a red bow
Perler bead chart of a gingerbread house with icing, candy canes and gumdrops
Gingerbread house

Examples generated with this tool

Perler Bead Pattern Maker at a glance

Input
Image upload processed in your browser, or a text prompt for an AI image.
Output
Grid chart, color key, PNG and printable PDF.
Palette
103 Perler bead colors.
Styles
Detailed, Simple (one board), Cute
Privacy
Uploaded images stay in your browser and are not sent to the server.
Cost
The converter and downloads are free; each optional AI image costs 2 credits.
Choose one subject, a plain background and a short flat palette.102 / 1000
Choose a style
Try a prompt
Perler bead chart of a green Christmas wreath with red berries, gold baubles and a red bow
Wreath with a red bow

1:1 · 1K image

FREE PREVIEW · NO CREDITS

Ready-made patterns

Open a finished design without an account. Preview and watermarked PNG are free; a printable PDF is $4.99.

Wreath with a red bow bead chart preview

Wreath with a red bow

58 × 58 beads, 13 colors

Gingerbread house bead chart preview

Gingerbread house

58 × 56 beads, 12 colors

Santa face bead chart preview

Santa face

58 × 64 beads, 13 colors

Reindeer with lights bead chart preview

Reindeer with lights

58 × 74 beads, 13 colors

Decorated tree bead chart preview

Decorated tree

58 × 82 beads, 13 colors

Snowman bead chart preview

Snowman

58 × 67 beads, 14 colors

FREE BROWSER PATTERN TOOL

Turn an image into a Perler bead pattern

Upload a picture below, or create an AI image and choose “Turn into a pattern”. Preview and watermarked PNG are free. The high-resolution printable PDF is $4.99 for this exact pattern.

Your image stays in your browser. It is not uploaded.

Choose an image to begin.

Pattern preview

Preview and watermarked PNG: free · Printable PDF: $4.99 one time.

Color data: craft-color-codes (CC BY 4.0) and beadcolors (MIT). Not affiliated with Perler or DMC.

Prompts to try

Select a prompt, then edit before generating.

Christmas bead designs to start from

Wreath with a red bow

A Christmas wreath of green pine with red berries, small gold baubles and a big red bow at the bottom.

Santa face

A smiling Santa Claus face with a fluffy white beard, rosy cheeks and a red hat with a white pom-pom.

Reindeer with lights

A cute reindeer head with a red nose, brown antlers wrapped in colorful Christmas lights and a green scarf.

Decorated tree

A decorated Christmas tree with a gold star, red and blue baubles, a yellow garland and three wrapped presents underneath.

Snowman

A snowman with a black top hat, carrot nose, striped red and green scarf, stick arms and three coal buttons.

Gingerbread house

A gingerbread house with white icing roof, candy cane door posts, gumdrops and a round window.

Quick one-board ornaments

Candy cane

One red and white striped candy cane with a small green bow.

Christmas stocking

A red Christmas stocking with a white cuff and one green holly leaf.

Gingerbread man

A smiling gingerbread man with white icing buttons and a red bow tie.

Snowflake

One symmetrical six pointed snowflake in light blue and white with a dark blue outline.

Pick a pattern that fits your pegboards

The six larger designs on this page are drawn at about 58 beads wide, which is four standard 29 by 29 pegboards locked into a square. They have room for real detail: individual berries on the wreath, lights tangled in the reindeer's antlers, icing lines on the gingerbread roof. Plan on 2,000 to 3,000 beads and an evening or two of placing.

If you only own one board, or you are crafting with younger children, start with the one-board ornaments instead. A candy cane, stocking or snowflake uses a few hundred beads and four or five colors, and a child can finish one in a single sitting. You can also shrink any large design: load it, set the width to 29 and lower the color limit until the shapes read clearly again.

Check your reds, greens and whites first

Christmas patterns lean on the same few colors, so they run out fast. After a pattern loads, read the bead count under the grid before you pour anything out. The wreath alone needs several hundred beads across three greens. If you are short on Dark Green, lower the color limit by one or two and the maker merges the greens into the shades you do have.

White needs a decision. Santa's beard, snow and icing are part of the picture and must be placed, but a plain white backdrop is not. Keep background removal switched on so the maker leaves those cells empty, and your snowman ends up as a snowman shape instead of a white square.

Turn finished pieces into ornaments, magnets and gifts

To hang a piece on the tree, leave one bead out near the top edge before ironing, or iron a loop of thin ribbon between the beads and a spare row on the back. A fused piece 29 beads wide is about 5.7 inches across, a good size for a tree ornament or a gift topper. The four-board designs come out near 11.5 inches and work better as a window or door decoration.

Glue a small magnet to the back for a fridge decoration, or tape a piece to a blank card for a handmade Christmas card. For coasters, fuse both sides a little longer so the holes close up and the surface turns flat and stiff. Classrooms and craft clubs can print the same PDF for everyone and hand each table a single color list to share.

Print at full size and iron with care

Download the PDF and print it at 100% scale, not fit to page. Each chart page then matches one pegboard, bead for bead, and you can slide it under a clear board and simply cover the dots. Board labels such as A1 and B2 show how the pages join for the larger designs.

Ironing is an adult job. Cover the beads with parchment paper and move a medium-hot iron in slow circles for ten to twenty seconds, until the beads have just joined. Let the piece cool under a heavy book so it stays flat. Large four-board pieces are easier if you tape the front with masking tape, lift the design off the boards and iron the back first.

Make a Christmas pattern nobody else has

The prompt box turns a sentence into a bead-friendly drawing. Describe one subject and its colors, for example “a penguin in a red Santa hat holding a wrapped gift”, and the AI draws it with chunky pixels, a dark outline and a white background. Press “Turn into a pattern” and it becomes a grid with Perler codes like the six above.

Family names, pets in Santa hats and a favorite Christmas food all work well. Stay with your own ideas: this page does not offer film or cartoon characters, and you should not make or sell patterns of characters or logos you do not own. Each AI drawing uses 2 credits. Opening, converting and downloading any pattern is free.

Frequently asked questions

Are these Christmas Perler bead patterns free to print?

Yes. Opening a pattern, changing its size and colors, and downloading the PNG or PDF are free and need no account. Only new AI drawings made from your own description use credits.

How many beads does a Christmas pattern need?

A one-board ornament 29 beads wide needs roughly 300 to 600 beads. The detailed four-board designs need about 2,000 to 3,000. The exact count for every color is listed under the grid.

Which Perler colors should I buy for Christmas patterns?

Most designs lean on Red, White, Dark Green, a lighter green such as Kiwi Lime, Black and a yellow or gold shade such as Cheddar. Check the color list of the pattern you choose before buying.

How do I turn a bead pattern into a tree ornament?

Leave one bead out near the top before ironing, then thread ribbon or a hook through the hole once the piece has cooled.

Can I make Grinch, Elf or other character patterns here?

No. The designs on this page are original, and the tool is meant for your own pictures and ideas. Please do not make or sell patterns of characters you do not own.

Explore the main tool

Perler Bead Pattern Maker

Each image costs 2 credits — about 6–8¢ with one-time credit packs from $5, no subscription. Try 1 image free — no sign-in needed. See pricing →

AI Draw Kit is an independent tool and is not affiliated with brands, marketplaces or characters a user may mention.